APPLICATION
Wastewater — sumps & transfer
Sump and lift-station duty with soft solids and fibres — submersible solids-handling hydraulics.
The typical duty
| Fluid | Wastewater / Sewage (with solids) |
|---|---|
| Temperature | 25 °C |
| Flow | 80 m³/h |
| Head | 18 m |
| Solids | 5% |
| Conditions | submerged installation |
What the selector says at this duty
| Primary answer at this duty | Submersible Sewage Pump — Sumps, pits, wastewater with solids |
|---|---|
| Typical wetted materials | Polypropylene (PP), Cast Iron, Carbon Steel, Stainless Steel 304, Stainless Steel 316L |
The answer above is the tool's own output at the duty shown — run your actual numbers through it; your duty point may move the answer. The full report adds the alternatives worth quoting in parallel.
What to watch
- Corrosive industrial effluent is a chemical duty in disguise — say what is in the water
- The 40 °C fluid ceiling is a hard line for hot effluent
Related reading
Your duty differs from the typical one? The selector on the home page maps your fluid, temperature and duty point to a pump type and wetted materials — free. Pick "Wastewater — sumps & transfer" in the Industry dropdown and the typical duty is pre-filled for you to adjust.
Open the tool →