MEDIA GUIDE
Wastewater & Sewage Pumps
Solids, fibres and chemistry nobody analysed — the pump type follows the solids, not the water.
The properties that drive the choice
| Hazard profile | none of note |
|---|---|
| Concentration band in our data | any (not banded) |
| In one line | Solids-laden; routing to solids-handling hydraulics. |
Which pump families serve it
At a reference duty (20 °C, 10 m³/h, 30 m, 5% solids). Your duty point may move the answer — run it through the tool below; the full report adds the alternatives worth quoting in parallel.
| Primary answer | Submersible Sewage Pump | Sumps, pits, wastewater with solids |
|---|---|---|
| Typical wetted materials | Polypropylene (PP), Cast Iron, Carbon Steel, Stainless Steel 304, Stainless Steel 316L | |
Where the boundaries sit
- Soft solids and rags pick the sewage family; grit and abrasion pick something harder
- Corrosive industrial wastewater is a chemical duty wearing a sewage costume — the materials question must be asked
- The 40 °C motor-cooling limit of submersible machines is a hard line for hot effluent
Related reading
Pumping this fluid? The selector on the home page maps your concentration, temperature and duty point to a pump type and wetted materials for this exact medium — free.
Open the tool →